hl ordering information 15a (1c), 10 a (2c) space saving power relay hl relays features 1. compact high-capacity control relay in the same external dimensions as an hc relay, this compact power relay enables high-capacity control: 15 a for 1 form c, 10 a for 2 form c. 2. designed for high reliability high operational reliability is achieved by solder-less construction, in which all connections between lead wires and the contact springs and terminal plate are welded. 3. various types provided in rich lineup. led indicator type also av ailable. 4. the terminals are compatible with #187 series tab terminals. 5. ul, csa app rov al is standard typical applications suitable for factory automation equipment and automotive devices 1. control panels, power supply equipment, molding equipment, machine tools, welding equipment, agricultural equipment, etc. 2. of?e equipment, automatic vending machines, telecommunications equipment, disaster prevention equipment, copiers, measuring devices, medical equipment, amusement devices, etc. 3. all types of household appliance about cd-free contacts we have introduced cadmium free type products to reduce environmental hazardous substances. (the suf? ? should be added to the part number.) please replace parts containing cadmium with cadmium-free products and evaluate them with your actual application before use because the life of a relay depends on the contact material and load. contact arrangement 1: 1 form c 2: 2 form c hl f contact material f: agsno 2 type terminal arrangement h: l: hp: pl: htm: plug-in type plug-in with led indication pc board type pc board with led indication tm type coil voltage ac dc 6, 12, 24, 48, 100 (100/110), 120 (110/120), 200 (200/220), 240 (220/240) v 6, 12, 24, 48, 100 (100/110) v notes: ul/csa approved type is standard. please inquire about tv approved products. all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. compliance with rohs directive
hl types 5. tm type standard packing: carton: 20 pcs.; case: 200 pcs. coil voltage 1 form c 2 form c part no. part no. 6v ac hl1-htm-ac6v-f hl2-htm-ac6v-f 12v ac hl1-htm-ac12v-f hl2-htm-ac12v-f 24v ac hl1-htm-ac24v-f hl2-htm-ac24v-f 48v ac hl1-htm-ac48v-f hl2-htm-ac48v-f 100/110v ac hl1-htm-ac100v-f hl2-htm-ac100v-f 110/120v ac hl1-htm-ac120v-f hl2-htm-ac120v-f 200/220v ac hl1-htm-ac200v-f hl2-htm-ac200v-f 220/240v ac hl1-htm-ac240v-f hl2-htm-ac240v-f 6v dc hl1-htm-dc6v-f hl2-htm-dc6v-f 12v dc hl1-htm-dc12v-f hl2-htm-dc12v-f 24v dc hl1-htm-dc24v-f hl2-htm-dc24v-f 48v dc hl1-htm-dc48v-f hl2-htm-dc48v-f 100/110v dc hl1-htm-dc100v-f hl2-htm-dc100v-f 1. plug-in type standard packing: carton: 20 pcs.; case: 200 pcs. 2. plug-in type (with led indication) standard packing: carton: 20 pcs.; case: 200 pcs. coil voltage 1 form c 2 form c part no. part no. 6v ac hl1-h-ac6v-f hl2-h-ac6v-f 12v ac hl1-h-ac12v-f hl2-h-ac12v-f 24v ac hl1-h-ac24v-f hl2-h-ac24v-f 48v ac hl1-h-ac48v-f hl2-h-ac48v-f 100/110v ac hl1-h-ac100v-f hl2-h-ac100v-f 110/120v ac hl1-h-ac120v-f hl2-h-ac120v-f 200/220v ac hl1-h-ac200v-f hl2-h-ac200v-f 220/240v ac hl1-h-ac240v-f hl2-h-ac240v-f 6v dc hl1-h-dc6v-f hl2-h-dc6v-f 12v dc hl1-h-dc12v-f hl2-h-dc12v-f 24v dc hl1-h-dc24v-f hl2-h-dc24v-f 48v dc hl1-h-dc48v-f hl2-h-dc48v-f 100/110v dc hl1-h-dc100v-f hl2-h-dc100v-f coil voltage 1 form c 2 form c part no. part no. 6v ac hl1-l-ac6v-f hl2-l-ac6v-f 12v ac hl1-l-ac12v-f hl2-l-ac12v-f 24v ac hl1-l-ac24v-f hl2-l-ac24v-f 48v ac hl1-l-ac48v-f hl2-l-ac48v-f 100/110v ac hl1-l-ac100v-f hl2-l-ac100v-f 110/120v ac hl1-l-ac120v-f hl2-l-ac120v-f 200/220v ac hl1-l-ac200v-f hl2-l-ac200v-f 220/240v ac hl1-l-ac240v-f hl2-l-ac240v-f 6v dc hl1-l-dc6v-f hl2-l-dc6v-f 12v dc hl1-l-dc12v-f hl2-l-dc12v-f 24v dc hl1-l-dc24v-f hl2-l-dc24v-f 48v dc hl1-l-dc48v-f hl2-l-dc48v-f 100/110v dc hl1-l-dc100v-f hl2-l-dc100v-f 3. pc board type standard packing: carton: 20 pcs.; case: 200 pcs. 4. pc board type (with led indication) standard packing: carton: 20 pcs.; case: 200 pcs. coil voltage 1 form c 2 form c part no. part no. 6v ac hl1-hp-ac6v-f hl2-hp-ac6v-f 12v ac hl1-hp-ac12v-f hl2-hp-ac12v-f 24v ac hl1-hp-ac24v-f hl2-hp-ac24v-f 48v ac hl1-hp-ac48v-f hl2-hp-ac48v-f 100/110v ac hl1-hp-ac100v-f hl2-hp-ac100v-f 110/120v ac hl1-hp-ac120v-f hl2-hp-ac120v-f 200/220v ac hl1-hp-ac200v-f hl2-hp-ac200v-f 220/240v ac hl1-hp-ac240v-f hl2-hp-ac240v-f 6v dc hl1-hp-dc6v-f hl2-hp-dc6v-f 12v dc hl1-hp-dc12v-f hl2-hp-dc12v-f 24v dc hl1-hp-dc24v-f hl2-hp-dc24v-f 48v dc hl1-hp-dc48v-f hl2-hp-dc48v-f 100/110v dc hl1-hp-dc100v-f hl2-hp-dc100v-f coil voltage 1 form c 2 form c part no. part no. 6v ac hl1-pl-ac6v-f hl2-pl-ac6v-f 12v ac hl1-pl-ac12v-f hl2-pl-ac12v-f 24v ac hl1-pl-ac24v-f hl2-pl-ac24v-f 48v ac hl1-pl-ac48v-f hl2-pl-ac48v-f 100/110v ac hl1-pl-ac100v-f hl2-pl-ac100v-f 110/120v ac hl1-pl-ac120v-f hl2-pl-ac120v-f 200/220v ac hl1-pl-ac200v-f hl2-pl-ac200v-f 220/240v ac hl1-pl-ac240v-f hl2-pl-ac240v-f 6v dc hl1-pl-dc6v-f hl2-pl-dc6v-f 12v dc hl1-pl-dc12v-f hl2-pl-dc12v-f 24v dc hl1-pl-dc24v-f hl2-pl-dc24v-f 48v dc hl1-pl-dc48v-f hl2-pl-dc48v-f 100/110v dc hl1-pl-dc100v-f hl2-pl-dc100v-f all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
hl rating 1. coil data 1) ac coils notes: 1. the relay operates in a range of 80% to 110% v of the voltage rating, but ideally, in consideration of temporary voltage ?ctuations, it should be operated at the rated voltage. in particular, for ac operation, if the applied voltage drops to 80% v or more below the rated voltage, humming will occur and a large current will ?w leading possibly to coil burnout. 2. the maximum allowable voltage is the maximum voltage ?ctuation value for the coil power supply. this value is not a permissi b le value for continuous operation. (this value differs depending on the ambient temperature. please contact us for details. 2) dc coils (at 20 c 68 f ) notes: 1. the rated excitation current is 10% (20 c 68 f ). 2. the coil resistance for dc operation is the value measured when the coil temperature is 20 c 68 f . compensate 0.4% for every 1 c change in temperature. 3. the relay operates in a range of 80% to 110% v of the voltage rating, but ideally, in consideration of temporary voltage ?ctuations, it should be operated at the rated voltage. 4. for use with 200 v dc, connect a 10 k ? (5w) resistor, in series, to the 100 v dc relay. 5. the maximum allowable voltage is the maximum voltage ?ctuation value for the coil power supply. this value is not a permissi b le value for continuous operation. (this value differs depending on the ambient temperature. please contact us for details.) 2. speci?ations notes: if integrating into electrical appliances that will be subject to compliance to the electrical appliance and material safety law, please use in an ambient temperature between ?0 c to +40 c ?8 f to +104 f (ac type). *1 this value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load. *2 for the ac coil types, the operate/release time will differ depending on the phase. *3 the upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value.refer to 4. conditions for operation, t r anspo r t and sto r age mentioned in ambient envi r onment. nominal coil voltage nominal coil current (ma) nominal operating power (va) pick-up voltage (at 20 c 68 f ) drop-out voltage (at 20 c 68 f ) inductance (h) max. allowable voltage 50hz 60hz 50hz 60hz when drop-out when operating 6v ac 224 200 1.3 1.2 80%v or less of nominal voltage (initial) 30%v or more of nominal voltage (initial) 0.078 0.074 110%v of nominal voltage 12v ac 111 100 1.3 1.2 0.312 0.295 24v ac 56 50 1.3 1.2 1.243 1.181 48v ac 28 25 1.3 1.2 4.974 4.145 100/110v ac 13.4/14.7 12/13.2 1.3 1.2 23.75 20.63 110/120v ac 12.2/13.5 10.9/11.9 1.3 1.2 27.19 25.57 200/220v ac 6.7/7.4 6/6.6 1.3 1.2 85.98 81.76 nominal coil voltage nominal coil current (ma) nominal operating power (w) coil resistance ( ? ) pick-up voltage (at 20 c 68 f ) drop-out voltage (at 20 c 68 f ) max. allowable voltage (at 70 c 158 f ) 6v dc 150 0.9 40 80%v or less of nominal voltage (initial) 10%v or more of nominal voltage (initial) 110%v of nominal voltage 12v dc 75 0.9 160 24v dc 37 0.9 650 48v dc 18.5 0.9 2,600 100/110v dc 10 1.0 10,000 characteristics item speci?ations contact initial contact resistance, max max. 50 m ? (by voltage drop 6 v dc 1a) contact material agsno 2 type rating nominal switching capacity 1 form c: 15a 125v ac, 10a 250v ac (resistive load) 2 form c: 10a 125v ac (resistive load) min. switching capacity (reference value)* 1 100ma 5v dc electrical characteristics insulation resistance (initial) min. 100m ? (at 500v dc) measurement at same location as ?nitial breakdown voltage section. breakdown voltage (initial) between open contacts 1,000 vrms for 1min. (detection current: 10ma.) between contact sets 1,500 vrms for 1min. (detection current: 10ma.) between contact and coil 2,000 vrms for 1min. (detection current: 10ma.) temperature rise max. 80 c (by resistive method, nominal voltage) operate time (at 20 c 68 f )*2 dc type/ac type: max. 25ms (nominal voltage applied to the coil, excluding contact bounce time.) release time (at 20 c 68 f )*2 dc type/ac type: max. 25ms (nominal voltage applied to the coil, excluding contact bounce time.) (without diode) mechanical characteristics shock resistance functional min. 196 m/s 2 (half-wave pulse of sine wave: 11 ms; detection time: 10 s.) destructive min. 980 m/s 2 (half-wave pulse of sine wave: 6 ms.) vibration resistance functional 10 to 55 hz at double amplitude of 1 mm (detection time: 10 s.) destructive 10 to 55 hz at double amplitude of 2 mm expected life mechanical ac type: 5 10 7 (at 180 cpm), dc type: 10 8 (at 180 cpm) electrical ac load 1 form c: 15a 125v ac, 10a 250v ac resistive load (cos ? =1) life switching cycle: min. 5 10 5 2 form c: 10a 250v ac resistive load (cos ? =1) life switching cycle: min. 3 10 5 dc load 1 form c: 3a 30v dc resistive load (cos ? =1) life switching cycle: min. 5 10 5 2 form c: 3a 30v dc resistive load (cos ? =1) life switching cycle: min. 5 10 5 conditions conditions for operation, transport and storage* 3 ambient temperature: ?0 c to +70 c ?8 f to +158 f (without led indication); ?0 c to +60 c ?8 f to +140 f (with led indication) humidity: 5 to 85% r.h. (not freezing and condensing at low temperature) max. operating speed 20 cpm (at max. rating) unit weight approx. 35g 1.23 oz all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
hl reference data dimensions (unit: mm inch ) 1. plug-in type switching capacity range (1 form c) switching capacity range (2 form c) 100 500 1,00010 10 15 1 0.1 dc inductive load (l/r=7ms) ac inductive load (cos ? =0.4) dc resistive load ac resistive load contact voltage, v contact current, a 100 500 1,00010 10 1 0.1 ac resistive load contact current, a contact voltage, v dc inductive load (l/r=7ms) ac inductive load (cos ? =0.4) dc resistive load 1 form c external dimensions 20.8 .819 35.4 1.394 6.35 .250 27.2 1.071 1.2 .047 2 3 6 78 10 .394 14.2 .559 3.95 4.6 6 7.15 .156 .181 .236 .281 compatible with tab terminal #187 series receptacle. 0.5 .020 general tolerance: 0.3 .012 schematic (bottom view) standard type 3 2 6 87 led ac type led dc type 8 7 ( ) ( ) 3 2 6 8 7 ( ? ) ( + ) 3 2 6 2 form c external dimensions 20.8 .819 35.4 1.394 6.35 .250 27.2 1.071 1.2 .047 1 2 4 3 5 6 78 3.7 4.7 6 7.3 .146 .185 .236 .287 10 .394 14.2 .559 0.5 .020 compatible with tab terminal #187 series receptacle. general tolerance: 0.3 .012 schematic (bottom view) standard type 34 12 56 87 led ac type led dc type 8 7 ( ) ( ) 34 12 56 8 7 ( ? ) ( + ) 34 12 56 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
hl 2. pc board type 1 form c external dimensions 20.8 .819 35.4 1.394 3.5 .138 5 .197 1.5 .059 2 3 6 78 10 .394 14.2 .559 3.95 4.6 6 7.15 .156 .181 .236 .281 27.2 1.071 1.2 .047 0.5 .020 general tolerance: 0.3 .012 schematic (bottom view) standard type 3 2 6 87 led ac type led dc type 8 7 ( ) ( ) 3 2 6 8 7 ( ? ) ( + ) 3 2 6 pc board pattern (bottom view) tolerance: 0.1 .004 5-.079 dia. 5-2 dia. hole 7.15 .281 .699 17.75 8.58.5 .335 14.2 .559 4.6 .181 6 .236 4 .157 10 .394 r.118 r3 r.079 r2 2 form c external dimensions 20.8 .819 35.4 1.394 3.5 .138 5 .197 1.5 .059 10 .394 14.2 .559 3.7 4.7 6 7.3 .146 .185 .236 .287 1 2 4 3 5 6 78 27.2 1.071 1.2 .047 0.5 .020 general tolerance: 0.3 .012 schematic (bottom view) standard type 34 12 56 87 led ac type led dc type 8 7 ( ) ( ) 34 12 56 8 7 ( ? ) ( + ) 34 12 56 pc board pattern (bottom view) tolerance: 0.1 .004 8-.079 dia. 8-2 dia. hole 7.3 .287 .709 18 13.3 .524 14.2 .559 1.25 1.25 1.25 .049 .049 .049 2 4 .157 4 4 10 .394 2 .079 .079 r.079 r2 r2 r.079 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
hl 3. tm type for cautions f or us e , see rel a y t e c hnical in f ormation. 1 form c external dimensions 20.6 .811 34.4 1.354 6.35 .250 2 3 6 78 37.6 1.480 .142 3.6 43 1.693 1.2 .047 2 .079 3.95 4.6 6 7.15 .156 .181 .236 .281 0.5 .020 compatible with tab terminal #187 series receptacle. general tolerance: 0.3 .012 schematic (bottom view) standard type 3 2 6 87 chassis (panel) cutout chassis (panel) cutout in tandem mounting 37.6 1.470 2-.126 to .138 dia. 2-3.2 to 3.5 dia. hole 21 23 .906 21 .827 .827 2 .079 37.6 1.470 tolerance: 0.1 .004 notes: 1. if connecting to #187 series tab terminals, use amp faston #187 series or #187 tab terminals conforming to ul or csa inch-standard dimensions. 2. in mounting, use m3 screws and m3 washers. 3. when mounting tm types, use washers to prevent damage or distortion to the polycarbonate cover. 4. when tightening ?ing screws, the optimum torque range should be 0.294 to 0.49 n?, (3 to 5 kgf?m). moreover, use washers to prevent loosening. 2 form c external dimensions 20.6 .811 34.4 1.354 6.35 .250 43 1.693 1.2 .047 2 .079 1 2 4 3 5 6 78 37.6 1.480 .142 3.6 3.7 4.7 6 7.3 .146 .185 .236 .287 0.5 .020 compatible with tab terminal #187 series receptacle. general tolerance: 0.3 .012 schematic (bottom view) standard type 34 12 56 87 chassis (panel) cutout chassis (panel) cutout in tandem mounting 37.6 1.470 2-.126 to .138 dia. 2-3.2 to 3.5 dia. hole 21 23 .906 21 .827 .827 2 .079 37.6 1.470 tolerance: 0.1 .004 notes: 1. if connecting to #187 series tab terminals, use amp faston #187 series or #187 tab terminals conforming to ul or csa inch-standard dimensions. 2. in mounting, use m3 screws and m3 washers. 3. when mounting tm types, use washers to prevent damage or distortion to the polycarbonate cover. 4. when tightening ?ing screws, the optimum torque range should be 0.294 to 0.49 n?, (3 to 5 kgf?m). moreover, use washers to prevent loosening. all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
hl relay accessories dimensions (unit: mm inch ) accessories (sockets and terminal sockets) hl relay t ype no. of poles item part no. pac king quantity carton case plug-in socket 1-pole hl1 socket hl1-ss-k 20 pcs. 200 pcs. 2-pole hl2 socket hl2-ss-k pc board socket 1-pole hl1 pc board socket hl1-ps-k 2-pole hl2 pc board socket hl2-ps-k din rail terminal socket 1/2-pole (common) hl2-din terminal socket hl2-sfd-k 10 pcs. 100 pcs. types 1. hl relay connection accessories include plug-in sockets, pc board sockets, and terminal socket for din rails. 2. ul/csa app rov al is standard. 3. a hold-down clip is included in the package. the ?ing method is the same as for hl sockets, hc sockets and ordinary hc terminal sockets. hc/hl-leaf-spring-mk the ?ing method is the same as for the hl din rail terminal sockets and the hc din terminal sockets. hc/hl-leaf-spring-k compliance with rohs directive 1. plug-in type sockets hl1 socket (hl1-ss-k) hl2 socket (hl2-ss-k) hl1 socket external dimensions 25.5 1.004 29.4 1.157 compatible with tab terminal #187 series receptacle. 11.2 .441 18.7 .736 general tolerance: 0.3 .012 note: the external and mounting dimensions of hl2 socket are the same for hl1 socket types. only the number of terminals varies. hold-down clip hold-down clip is packaged with the socket. (applied to hc sockets and ordinary hc terminal sockets) mounting hole diagram side-by-side installation tolerance: 0.1 .004 notes: 1. applicable chassis board thickness is 1.0 to 2.0 mm. 2. installation is easy by inserting the socket from the top into the holes and by depressing the two down arrows on the retention ?ting from the front. 8.9 .350 25.8 25.8 1.016 1.016 21.6 21.6 .850 .850 5.9 .232 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
hl relay accessories 3. terminal sockets for din rail assembly (hl2-sfd-k) for cautions for use, see relay technical information. 2. pc board type sockets hl1 pc board type socket (hl1-ps-k) hl2 pc board type socket (hl2-ps-k) hl2 pc board type socket external dimensions 21.2 .835 29.4 1.157 16.2 .638 11.2 .441 1.0 .039 2.0 .079 general tolerance: 0.3 .012 note: the external and mounting dimensions of hl2 pc board type socket are the same for hl1 pc board type socket. only the number of terminals varies. hold-down clip hold-down clip is packaged with the socket. (applied to hc sockets and ordinary hc terminal sockets) pc board pattern (bottom view) 1 form c 2 form c tolerance: 0.1 .004 side-by-side installation (for 2 form c) tolerance: 0.1 .004 17.45 .687 10 .394 4.7 .185 15.3 .602 6.75 .266 6.75 .266 2.4 dia. hole .094 dia. 15.3 .602 17.45 .687 12.75 .502 10 .394 2.4 dia. hole .094 dia. 10 1013.2 .394 .394.520 17.45 17.45 17.25 .687 .687 .679 15.3 7.9 .311 15.3 .602 .602 (6.6) (5.3) (.260) (.209) hl2-terminal sockets for din rail external dimensions general tolerance: 0.3 .012 5 7 4 8 1 6 3 2 8 .315 26 0.6 30 0.6 1.024 .024 1.181 .024 10 0.2 .394 .008 .602 .008 15.3 0.2 21.1 0.6 .831 .024 28.6 0.6 1.126 .024 m.138 m3.5 screw .394 .012 10 0.3 67 1 2.638 .039 1.35 0.1 .053 .004 .183 .008 4.65 0.2 .368 .008 9.35 0.2 8.1 0.2 .319 .008 schematic mounting hole diagram 21 43 65 87 26 30 4 .157 26 1.024 1.024 8 .315 30 1.181 1.181 67 2.638 33.5 1.319 2-m3.5 screw hole (or 4.2 0.1 dia. hole) 2-m3.5 screw hole (or 4.2 0.1 dia. hole) chassis (panel) cutout in tandem (side-by-side) mounting with a relay mounted hold-down clip is packaged with the terminal socket. (applied to hc din rail terminal sockets) tolerance: 0.1 .004 *to prevent damage or distortion, when tightening ?ing screws, the optimum torque range should be 0.784 to 0.98 n?, (8 to 10 kgf?m). all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
|
